Matte Black 10mm Frameless Shower Screen Standard Enclosure 2100x850x850

Description

• Standard enclosure 850 front x 850 return x 2100H (230 infill,600 door,850 panel)
• 10mm toughened safety glass AS/NZS 2208
• Matte Black hardware
• Front & Return kits include hardware and glass
  Hardware
  *2 x 180 degree glass to glass hinges (H-GG180 MB )
  *4 x glass fix brackets square (H-GFB10 SQMB)
  *Knob Handle Round (H-KHRD MB)
  *Under door waterseal
  Glass
  Glass Panels

*other combinations and sizes available on request

Standard enclosure 850 x 850 x 2100H

Deduction/Gap Guide: 3-4mm between each wall and panels & 10mm for the width of the return panel

Note: Standard glass please ensure you have measured the wall and floor levels

Download instructions

For doors hinged directly from the wall a stud fixing is required that is either a double stud or an approx. 90mm width of timber fitted between nogs at hinge levels. If this is not possible, it is recommended that the door be hung from an infill glass panel.

All efforts should be made during design to ensure that the shower rose is not positioned directly opposite the frameless screen door. At least a 15mm fall to the waste is recommended to avoid ponding. Contact us while you are planning your shower design to discuss your options.

Note: Professional installation in line with AS1288-2006 by a qualified glazier is highly advised for this design. Pipers have a National installation network* please contact us on 1300 005 384 to discuss or submit an online enquiry.

*Most metro areas and some country areas