Splashbacks

As per Australian Standard As1288 clause 5.11 'toughened safety mirror safety glass mirrors are likely to distort as a result of the toughening process.'

Certified glass is supplied by Pipers International compliant with the Australian Safety Standard AS/NZS 2208:1996 requirement at the time of manufacture. The standard applies to all safety glazing materials as required by AS 1288:2006. A certificate of compliance is available with every order. Please contact Customer Service on 1300 005 384 or email quoting your receipt number (if available) or retailer location and your job address.

Pipers International process custom made glass locally.

Whilst we highly recommend our full service supply and installation service we also manufacture supply only based on customers specifications. Guidelines for supply only orders:
  • If you require templates; all templates must be made from sturdy material (e.g. Perspex, steel/tin, timber/ply)
  • Templates must be full size
  • Out of square measurements must be shown exactly
  • Indicate colour name on your order
  • Measurement from centre of powerpoint
  • Standard power point sizes are 100 x 60mm
3600mm is the limit of our glass length. Special orders available up to 4500mm. Access must be measured out.
Simply multiply the length of the area by the height. For example if the height is 750mm and the length is 2200mm: 0.75m x 2.2m = 1.65m2
Yes. Each splashback is made to order and there are no standard sizes. Our team of experts use only the best safety glass made to Australian Standards. You come direct to the manufacturer, that’s why are prices are the most competitive in the market place.
The modern sleek design of glass splashbacks will brighten up your room. And no grout means no mould or mildew. The splashbacks are much easier to clean and look brand new even after years of use.
Yes. Ensure your cooktop is installed according to Australian Standards. Direct heat i.e. a pot leaning on the glass may cause the paint to burn.
Our preferred paints Resene paints. However we can match any colour in today’s market place. Whether it’s a dulux or taubmans or other paint provider colours. Just provide the name of the paint and we’ll match it accordingly.
We recommend a smooth surface of plasterboard, cement sheeting, MDF or concrete to maximize the effect of the splashback. However it is possible to adhere the splashback on top of your existing tiles. If you choose this option please be aware that you will loose approximately 6mm of bench space and it may look bulky at the sides if this is visible.